 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Drive Mode: | Cylinder Drive | Materials Of Explosion-proof Tank: | Galvanized Sheet With Baking Finis |
|---|---|---|---|
| Power Supply: | AC 1 Phase 220V 60/50Hz | Penetrating Force: | 150~200KG |
| Force Display: | Pressure Sensing And LED Display | Test Stroke: | 150mm |
| Steel Nail: | Dia. 2mm-Dia. 8mm High Temperature Resistant | Dimension Of Controller Box:: | 300*260*170mm |
| Penetrating Speed: | 10-40mm/s | ||
| High Light: | battery testing equipment,impact test apparatus |
||
Battery Nail Penetration Tester,Phone Battery Nail Penetration Tester
Introduction:
Using steel nail penetrating the battery, the tester is used to check safety capability of battery, and the battery is qualified without fire, and explosion. The nail penetrating test is processed under temperature of 20℃±5℃. The specimen battery has thermocouple whose contact spot is located on the largest surface.Place the battery on the fuming cupboard, using stainless nail with diameter of 2-8mm to penetrate the centre position of largest side of battery at speed of 10mm/s-40mm/s and keep for 5s.
Features:
1 .The wire enclosed with metal fire-proof cover, which is available to prevent the flame during testing process.
2 .Lighting system is designed to observe the internal testing process;
3 .Nail Penetration/Crush Velocity with controllable range of 10~80mm/s;
4 .Nail Penetration/Crush Force controllable within range from 250N to 13KN ,meet different standards;
5 .Wire hole provides a possibility to test internal temperature or air pressure while vent hole with air blower can discharge the exhaust air.
6 .Control system employs independent control cabinet & separated with the test chamber with a distance 1-2 meter, which can reduce the noise and improve safety.
Specification:
|
Power
|
• 208V- 240VAC standard, 500W
• To use the unit at 110 V, please order 500W transformer, |
|
Control Panel
|
• Driving Force is adjustable by air cylinder valve.
• Digital Display for impact force on control panel • Minimum 100 PSI air compressor with 2 gallons tank is required to drive the machine ( Air Compressor is not included, Please order it at local or order separately by clicking underlined) |
|
Penetration Force
|
• 0 ~ 500 kg
• Suitable for single cell and small battery pack. |
|
Steel Nails
|
• Seven steel nails (2mm, 3mm, 4mm, 5mm,6mm, 7mm & 8mm diameter) are included in the standard package,
• Other diameter nails can be ordered upon request. |
|
Penetration Speed
|
0~80mm/s adjustable
|
|
Dwell Time
|
0-9999 seconds
|
|
Working temperature
|
RT ( room temperature )
|
|
Operation Chamber
|
• Chamber inside is made of stainless steel to resist fire and easy to clean.
• There is a front observation window which is made of double layers high strength glass. • Chamber size: 16" x16 "x 16" , ( 400 x 400 x 400mm ) • One clamp driven by compress air can hold sample tightly • Max. sample size can be accommodated: 8"x8"x8" (200 x 200x 200 mm ). • Please click the picture to the left to view details. |
|
Features on the back
|
• Easy electrical connection with the control stage
• One exhaust fan is built inside of the chamber to remove smoking. • Air venting port is 145mm in diameter, which must be connected to vent port in your lab via a tube ( not included, please order at local hardware store ) • Quick connection for 8mm O.D compresses air tubing • Two side ports allow electrical cables pass through • Pressure release door prevents pressure built up inside the chamber |
|
Machine dimension
|
36"L x 20"W x 58" H (920x 510x1470 mm )
4 mobile wheels are installed at the bottom and allow an easy move. |
|
Net weight
|
330 lbs ( 150Kg)
|
|
Shipping weight
|
600 lbs
|
|
Shipping Dimension
|
47" x 40" x 71"
|
|
Warranty
|
One year limited with lifetime support
|
|
Compliance
|
CE certified
|
|
Application Note
|
Note: The max. capacity of Li-Ion batteries to be tested in the chamber should be limited to 4.2V@ 40Ah for single cell or 160Wh for battery pack without protection circus
|
| Model | XB-OTS-660 |
|---|---|
| Steel nail | Dia. 2mm—Dia. 8mm high temperature resistant |
| Space between battery surface and nail point | 150mm |
| Penetrating speed | 10—40mm/s |
| Penetrating force | 150~200KG |
| Force display | Pressure sensing and LED display |
| Test stroke | 150mm |
| Drive mode | Cylinder drive |
| Structure of tester | Box-type to be explosion proof, fire proof, anti-corrosion and easy to clean |
| Dimension of explosion proof tank | 450×750×550mm(W×H×D) |
| Materials of explosion-proof tank | Galvanized sheet with baking finish |
| Dimension of controller box |
300×260×170mm |
Contact Person: Bonnie
