This machine is mainly for testing the resistance and tolerance of safety helmet from impacting and puncturing.
1. Structure: Assembled under European standard, with built-in folding structure, makes this machine durable but with modern design.
2. Position system: The magnetic flux leakage free system can ensure the accurate positioning of test samples.
3. Display system: Self-recording and self-locking the impact value, the LED screen display test value automatically.
4. Test system: 5000HZ dynamic sensor, which can collect and output the data automatically.
5. Protection system: Metal net protection; fixture for test samples; The foot switch is installed at the bottom, which greatly reduces the possibility of accident in the test and further improves the safety of the test operation.
6. Impact method: Free ball, which simulates the dropping accurately.
7. Test helmet mold: Spacial designed NO.1 and NO.2 met mold, which not only meets the standard, but also can be repaired after impact test.
|Material :||#45 metal|
|Cone angle:||60°/ 40mm long|
GB 2811-2007 Safety Helmet; GB/T2812-2006 Tests for Safety Helmet
If you have any interest of the products above, or if you need any professional advice of those machines, welcome to contact us.
Contact Person: Mr. Andy Xiao