 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | 100 M³ Walk In High Temperature Aging Test Chamber For Small Plane Testing | Temperature Range: | RT~120℃ |
|---|---|---|---|
| Heat Up Rate: | About 3℃~5℃/min； Can Be Custom | Chamber Materials: | SUS#304 Stainless Steel For Internal Chamber |
| Viewing Window: | The Transparent Electro Thermal Hollow Toughened Glass | Material: | SUS#304 Stainless Steel For Internal Chamber; Galvanized Steel With Ivory White Powder Coated Finish For External Chamber |
| Confrim Standard: | ISO, ASTM,UL, CEN | ||
| High Light: | walk in stability chamber,walk in climatic chamber |
||
100 m³ walk in high temperature aging test chamber with sliding doors for small plane testing
Introduction:
100 m³ walk in high temperature aging test chamber for small plane testing, also known as Burn-in Room, is one of the common equipment in all kinds of aging tests, which widely used in electronic,computer, communication and any other field . It is consist of containment structures, air duct system,control system,indoor test architecture and other components.
Specifications:
|
||||||||||||||||||||||||||||||||||||||||||
Applications
For all types of electronic products quality inspection , electric appliance, and communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries products.
Features:
1.Accurate and precise temperature control .The air system and electric control system are uniquely designed to achieve even temperature distribution within the room ,which is far superior to similar product
2.The temperature setting of the room may very from ambient temperature to 80 degree. Upon customer’s special requirement ,products with even higher temperature can be developed ?
3.The temperatures of several areas inside the room are rolling displayed in order to ensure clear and accurate monitoring of the temperature .
4.The complete protective functions of the system can ensure safe smooth operation of the device for a long time
| Structure | The Whole Assembly Structure |
|
5.1Structure model
|
The whole assembly structure, the test tank at the user's site assembly, due to the box size is too large, in order to ensure the strength and security of the box, outside the library board fastening steel skeleton library board, library board material to prevent creep at high temperature state variable create an unsafe deformation. Observe large facade, the front within the studio, the refrigeration unit is designed to be independent of the rack, placed separate room, away from the unit and install the chamber can not be greater than 3 meters, the studio has a bottom drains (users need to ground under the gutter). Control panel placed in a separate control cabinet.
|
| 5.2 Outer material | Butter yellow color steel high temperature paint handling |
| 5.3 Inner material | International Universal stainless steel with thickness 08mm and the internal structure of the stiffener, plus trough |
| 5.4Insulation material | Polyurethane PU foam board used on the walls and ceiling with thickness 100mm. |
| 5.5 Door | Double Door dimension: W2000mm×H2000mm.Using double imports of silicon rubber seal, a 20-year service life, high temperature resistance, anti-aging, good sealing performance. In order to prevent condensation at low temperature test door edge and the door or frost, door edge and the door is provided with an electric defroster, inside of the door frame welded stiffeners to ensure its strength to prevent deformation of the door. |
| 5.6 Observation window | Hollow fever frost resistance film embedded in the observation window observation window stickers transparent film to prevent a sudden burst of broken glass flying, effectively protect the eyes and body from harm, box requires three layers of glass with an observation window with glass surface with an internal heater to prevent electrical heating of water condensation and frost. |
| 5.7 Test cable hole |
Set in the left side of the box has a φ50mm, with a special silicone foam rubber stopper |
| 5.8 Lighting device |
4 pcs with 150W for each inside (side wall mounted in up area) Safe voltage waterproof, moisture, low voltage lighting, and meet the relevant national safety standards, moisture resistance, high temperature lamps |
| 5.9Pressure balancing device | A relief hole at the top of the box, easy to maintain a relative balance between indoor and outdoor pressure |
| 5.10 Condensed water hole | Condensate and has a studio unit condensate outlet aperture, external hoses exclude outside the box, to ensure that the test chamber without water. |
| 5.11Studio drainage holes | Has drainage holes at the bottom of the box so that the outflow in the test water and condensate. |
| 5.12Transition springboard | Chamber and out of the chamber with safety activities ramp and out of warehouse environment safe and convenient. |
| 5.13 Main structure |
(1) Cooling area (2) electrical control area (3) test product test area Three parts of the main structure; floor bearing not less than 1Ton / m2 |
Contact Person: Dorla Xie
Tel: +8613829110447
