 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Model Numbe: | XB-OTS-1000P | Product Name: | Stainless Steel Sand Dust Test Chamber For Electronic Products |
|---|---|---|---|
| Dust Concentration:: | 2kg/m3~5kg/m3, Should Be Replaced | Dust Type: | Powdered Cement, Dry Talcum Powder |
| Blower: | Centrifugal Fan | Environment Temperature And Humidity:: | 15~45c, 45~75%Rh |
| Sieves Hole Size: | 75um | Wire Netting Wire: | 50um |
| Dimension: | All Size Customized | ||
| High Light: | climate control chamber,temperature and humidity chamber |
||
Stainless Steel Sand Dust Test Chamber For Electronic Products
Introduction
This sand dust test chamber is used to simulate the natural climate sand on the destructive nature of the product, suitable for testing the product shell sealing performance, mainly for the enclosure protection level standard IP5X and IP6X two levels of the test.
Vertical circulation of the air with dust, and the test dust can be recycled, the entire duct is made of imported high-grade stainless steel plate, the bottom of the duct and the cone hopper interface connection, fan inlet and outlet directly connected with the duct, and then in the appropriate location The top of the studio will be the top of the expansion of access to the studio body, the formation of "O" closed vertical blowing dust blowing system, so that the air flow can flow smoothly, the maximum dust evenly dispersed.
Using a single high-power low-noise centrifugal fan, and using the frequency converter to adjust the wind speed according to the test requirements.
Specifications :
| Type | XB-OTS-800P | XB-OTS-1000P | XB-OTS-1500P |
| Inner dimensions (mm) | 800×800×800 | 1000×1000×1000 | 1000×1500×1000 |
| outside dimensions (mm) | 1200×1300×1900 | 1400×1500×2150 | 1450×2000×2300 |
| Nominal line diameter of metal screen | 50 μm , nominal spacing between lines are 75μm | ||
| Airflow velocity | ≤2m/s | ||
| Dust concentration | 2 ~ 4kg / m3 | ||
| Test dust | dry talcum powder, Portland cement and so on | ||
| Temperature range | RT ~ 60 C | ||
| Circuit control system | P.L.C control system | ||
| Heating system | circulating air heating | ||
| The flow control of vacuum pump | 60~ 600L/H | ||
| Ambient humidity | ≤85% | ||
| Power requirements | AC380 (±10 % )V/ 50Hz ( power cord length greater than 3m ) | ||
| Installed capacity | approx . 3KW | ||
Structure:
1. LCD Touch Screen Programmable Sand and Dust IP Test Chamber Inner material: Stainless steel (SUS #304)
2. LCD Touch Screen Programmable Dust Proof Test Equipment Outer material: Powder painting steel plate
3. Dust Test Equipment use imported touch screen programmable controller, can control dust blowing
motor, dust vibration and test time.
4. With sealing good chamber door, has lock device and glass observation window.There is lamp and dust
brush to ensure easy observation of inner chamber.
5. With strong dust blowing device and vibrator to ensure informity of each blowing.
6. Circulating air supplying device: Frequency converter and high pressure motor to ensure the air volume
more precision.
7. Large diameter strong stainless steel air hose, covered with heating device, can heat and dry the test
chamber dust.
8. Anti-explosion handle, easy operation, strurdy and durable.
9. Imported high-precision electronic temperature humidity sensor and air speed sensor.
10. Test sample differential pressure test device, can set pumping rate freely according to sample inquiry.
11. There is a ψ50mm test hole on the left chamber and equipped with port lid and silica gel chock plug.
Through this hole can connect to outer test device.
12. There are casters with brake equipments and fixing foot pad to make the machine easy operation and
level adjustment.
13. With voltage current indicator, equipped with corresponding sample DC12V power, DC24V/20A, interval, continuous power supply adjustable. Dust concentration wind speed regulating function. May control test total time, blow the dust of time interval and blowing dust cycle and sample with the power source of the intermittent time.
14. Vacuum system: Equipped with pressure meter, air filtration, dust dehumidification system, regulating
triple pieces, connecting pipe (Vacuum pump should be prepare by customer)
Please feel FREE to contact us if you have any needs.
JIS 0207 F2 Dust Test Chamber To Verify Protection Against Dust
JIS D 0207 F2 Dust Test Chamber To Verify Pr
ote
ction Against Dust
Contact Person: Mr.
