|
Product Details:
Payment & Shipping Terms:
|
Model Numbe: | XB-OTS-800 | Product Name: | Lab Waterproof Testing IPX1~IPX9 Rain Spray Test Chamber For Electrical Parts |
---|---|---|---|
IP1/ 2 Dripping Hole:: | IP3 15 /Min;IP4 10/Min | Rain Pressure: | Speed Of Turntable Rpm |
Speed Of Turntab: | 1~10 Adjustable | Spray Water Angle: | 0°, 30°, 60°, 90°, Each Angle Spray |
Drop Test: | 0.1~1.5°C/Min | Temperature Rising Speed:: | Ipx3. Ipx4 Swing Pipe: Rt-+80°C |
Test Standard:: | JIS, ISO, IEC60529, DIN40050, GB4208 | ||
Highlight: | walk in environmental chamber,temperature and humidity chamber |
Lab waterproof testing IPX1~IPX9 Rain Spray Test Chamber for Electrical Parts
Waterproof Rating:
IPX-1 Protected against falling water Equivalent to 3-5mm rainfall per minute for a duration of 10 minutes.
Unit is placed in its normal operating position.
IPX-2 Protected against falling water when tilted up to 15 degrees - Same as IPX-1 but unit is tested in 4 fixed positions -
tilted 15 degrees in each direction from normal operating position.
IPX-3 Protected against spraying water - Water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80-100kN/m2 for 5 min.
IPX-4 Protected against splashing water - Same as IPX-3 but water is sprayed at all angles.
IPX-5 Protected against water jets - Water projected at all angles through a 6.3mm nozzle at a flow rate of 12.5 liters/min at
a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters.
IPX-6 Protected against heavy seas - Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 liters/min at
a pressure of 100kN/m2 for 3 minutes from a distance of 3 meters.
IPX-7 Protected against water immersion - Immersion for 30 minutes at a depth of 1 meter.
IPX-8 Protected against water submersion - The equipment is suitable for continual submersion in water under conditions which are identified by the manufacturer.
The main technical parameters
IPX9 Rain Spray Test Chamber | |
Item | Specification |
Internal chamber size | 1000Wx1000Dx1200Hmm |
External chamber size | 1500Wx1200Dx2100Hmm |
Spray water temperature | 80℃ |
Spray water pressure | 80~100bar (8000~10000Kpa) |
Water flow | 14~16L/min |
Spray water distance | 10~15cm |
Spray water angle | 0°, 30°, 60°, 90°, each angle spray for 30 seconds |
Sample rotatory table | 5rpm |
Water spray interval time | 30 seconds (adjustable) |
Water cycling system | Built-in chamber bottom for recycling |
Controller | PLC touch screen |
Chamber material | Internal: SUS304 stainless steel, external: stainless steel |
Power | AC380V, 50Hz, three phase |
Lab waterproof testing IPX1~IPX9 Rain Spray Test Chamber for Electrical Parts
Model | XB-OTS-800 | XB-OTS-1000 | ||||
Inner chamber size W×H×D(mm) | 800*800*800 | 1000*1000*1000 | ||||
Exterior chamber size W×H×D(mm) | 1160*1640*960 | 1360*1840*1160 | ||||
Water temperature | Normal atmospheric temperature | Normal atmospheric temperature | ||||
Type of | Total flow rate | R1 | 1.8 | IP×1 | 1~1.5mm/min | |
spray test | (L/min) | R2 | 3.2 | IP×2 | 3~3.5mm/min | |
S1 | 24.5 | IP×3 | ±600;R:400;1.1L/min | |||
S2 | 39.2 | IP×4 | ±1800;R:400;1.8L/min | |||
Spray nozzle pressure | R1 | 0.1 | 1.Water flow rate of each hole is0.0.7L/min. | |||
(kgf/c㎡) | R2 | 0.3 | 2.IP×3,radius 400mm,total 16 holes,water flow rate is 1.1L/min. | |||
S1 | 1 | 3.IP×4,radius 400mm,total 25 holes,water flow rate is 1.81L/min. | ||||
S2 | 3 | |||||
Rotating speed of testing platform | 17RPM | 1RPM | ||||
Rotating speed of spray nozzle | 23RPM | 1.Spraying tube is driven to move for 30º on each side along the vertical,4 seconds per round-trip. | ||||
2.Spraying tube is driven to move for 180º on each side along the vertical,12 seconds per round-trip. | ||||||
Material | Inner chamber | SUS#304 | ||||
External chamber | ||||||
Other components | Chamber lamp,rain wiper,caster | |||||
Power supply | AC 3phase 380v 60/50Hz | |||||
Customization service | Non-standard or special requirements are all welcome |
Pre-service
--24 Hours online service for your consult.
--Help choose right model,and a series of service,person,advise.
Middle service
--Give you best offer.
--Provide discount for many sets order.
--Do customer's request.
--Choose payment term you convienent.
--Promptly production and delivery,inform you in time.
--Can provide invoice value as you like to decrease your tax.
After sale service
--14 months warranty service and all life maintenance.
--Technical Egineer are avalible for oversea trainning.
--Free change for some parts.
--Remote control technical consult.
--Free installation DVD.
--Maintenance plan.
Please feel FREE to contact us if you have any needs.
Lab waterproof testing IPX1~IPX9 Rain Spray Test Chamber for Electrical Parts
Contact Person: Mr.