|
Product Details:
Payment & Shipping Terms:
|
Dimension: | 600L*600Dmm Square | Axis: | 3 Directions X-Y-Z |
---|---|---|---|
Max Load: | 45kg | Frequency Range: | 5-2000Hz |
Max Acceleration: | 981m / S2 | Dimensions (without Packaging)(L×W×H): | 1600mm×985mm×850mm |
Vibration Table Weight: | 1850kg | ||
High Light: | vibration testing equipment,vibration lab equipment |
Vibration Testing Equipment,Vibration Test Equipment,Electromagnetic Vibration Testing Machine
Equipment breakdown Introduction
1.Vibration table
* Dual magnetic structure of the high magnetic field strength, magnetic flux leakage; special degaussing structure can drop 1mT the following table magnetic flux leakage.
*Adopt dynamic optimization of dynamic skeleton in reducing moving parts while improving the quality of the first-order resonance frequency, broadening the electrodynamic vibration limit the operating frequency.
*Built-supporting air spring-loaded, large capacity, good low-frequency characteristics
*Multi-layer rubber isolation trunnion vertical orientation; when a large load of work, platform smooth movement; vertical vibration-free with special foundations.
*System with platform body overheating, overload, over-current, over-voltage, over displacement protection. Grid overvoltage, undervoltage, lack of equal protection. Driving power protection, current limiting protection, soft start settings, temperature protection, excitation open, short circuit protection, fault protection and other protection modules.
*And digital vibration control device support can be achieved sine, random, classical shock, shock response spectrum, various environmental adaptability sinusoidal vibration test random + random + random vibration.
*System requirements for low voltage fluctuations (≤ ± 10%).
*Low resistance grounding system requirements (≤ 4Ω).
*High system reliability, especially suitable for long-running work environment.
Features:
*The introduction of foreign technology, key components and materials imported (air springs, epoxy resin, stainless steel, rubber shock absorber, etc.);
*Built-supporting air spring-loaded, large carrying capacity;
*Multi-layer rubber isolation trunnion vertical orientation;
*Using finite element analysis made no skeleton dynamic, more efficient while increasing the resonance frequency of the moving coil moving parts to reduce the quality
System Performance parameters
Vibration table | ||
Sine thrust | 600kgf | |
Random thrust | 600kgf | |
Impact thrust | 1200kgf | |
Frequency Range | 5~2000Hz | |
Continued displacement | 51mm | |
The impact of displacement | 51mm | |
Maximum speed | 2m/s | |
Maximum acceleration | 981m/s2 | |
Moving coil diameter | Φ150mm | |
Allow eccentric moment | >190N.m | |
Load connection point | 6 piont | |
Equivalent mass of moving parts | 6kg | |
Countertops screw size (standard) | M8 | |
Screw layout table (diameter, circumference) | 8 on Φ100mm,8 on Φ,200mm. | |
Axial isolation frequency | <3Hz | |
Maximum load | 120Kg (customer request 45Kg) | |
Magnetic flux leakage | <1mT | |
Dimensions (without packaging)(L×W×H) | 1600mm×985mm×850mm | |
Vibration table Weight | 1850kg | |
Amplifier output | 8kVA | |
SNR | >65dB | |
System Protection | The entire power amplifier has: Grid overvoltage, undervoltage power grid phase, logical failure, power module protection, power module temperature, output overcurrent, output overvoltage, power supply, displacement units, units body temperature, external linkage, etc. protection circuit, when any fault occurs, turn off the output, sound and light alarm. In addition to the above protection, it also has a protective function RMS values of tolerance protection, emergency stop devices, such as improving running. | |
Rated output voltage | 120Vrms | |
Amplifier efficiency | >95% | |
Fan | ||
Power | 0.75kW | |
Airflow | 0.3m3/s | |
Duct diameter | 120mm | |
Pressure | 0.048kgf/cm2 | |
Vertical extension table | ||
Table size | 600mm×600mm | |
Equivalent mass | 23kg | |
Upper frequency | 2000Hz | |
Countertop Materials | Aluminium | |
Horizontal slide | ||
Table size | 600mm×600mm | |
Thickness | 30mm | |
Countertops weight | 36kg | |
Frequency | 2000Hz | |
Bearing number | 1 | |
Bearing weight | 0.58kg | |
Connector Weight | 1.4kg | |
Maximum Load | 300kg | |
Countertop Materials | Aluminium |
Vibration controller | |
Enter the number of channels | 2 voltage channels, 2 charge channels |
Number of output channels | 1 Drive output, 1 COLA output |
Resolution | 24-bit digital-to-analog converter (DAC / ADC) |
Anti - aliasing filter | Analog anti-aliasing filter plus digital filter, stopband attenuation greater than 160dB / Oct |
Coupling method | AC differential, AC single-ended, DC differential, DC single-ended, IEPE, TEDS (optional), charge |
Enter the range | ± 10 VPEAK |
controlling software | Sine control, random control, typical impact control, resonant search and presence |
Contact Person: Mr.